Signs Your Asphalt Roof Needs to Be Repaired

Problems Opening Your Garage Door: Identifying The Culprit Behind Your Garage Door Troubles

Are you experiencing problems with the opening and closing of your garage door? If so, there is a good chance that either your automatic garage door opener or your garage door spring are to blame for these problems. However, until you determine which of these common culprits is really to blame, you will not be able to devise a plan to correct the problem. Thankfully, making this determination may be much easier than you think. In order to complete this task, simply follow the two steps outlined below:

Step #1: Disengage Your Garage Door Opener

The only way to determine exactly which part is to blame for your garage door troubles is to take one of these parts out of the equation. Since your garage door cannot function properly without a functional spring, the logical solution is to remove your garage door opener from the equation. In order to do this, you will need to disengage your automatic opener so that you can manually operate your garage door.

To disengage your garage door opener, you will first need to identify the emergency release cord. This release cord is typically located near the top of your garage door or directly below the motor of your garage door opener. In some cases, this cord will be red in color for easy identification and may have an emergency handle located at the bottom of the cord.

Once you have successfully identified the emergency release cord, simply pull this cord and your garage door will be ready for manual operation.

Step #2: Manually Open Your Garage Door

Now that the only part in play is your garage door spring, attempt to open your garage door manually from the outside of the garage. If the door is too heavy to move, your garage door spring is broken and will need to be replaced immediately.

If you are able to open your garage door, try opening the door only a few feet off the ground and letting go. If the door remains stable at the point of release, your spring is in good working order and the source of your garage door troubles is most likely your garage door opener. However, if the door begins to fall back to the ground after release, your spring is becoming worn and will need to be replaced or repaired as soon as possible.

In Conclusion

Now that you know exactly which part is to blame for your recent garage door troubles, you will be able to devise the most appropriate garage door spring repair plan to correct this problem. If you have found that your garage door opener is faulty, replacing this unit will be your best option. In many cases, this can be done on a do-it-yourself basis. However, if your have found that your garage door spring is at fault, you will need to hire a qualified contractor to replace this essential part.


Share